Location:Chennai, Tamil Nadu, IndiaJob ID: R0135685Date Posted:2026-07-14Company Name:HITACHI ENERGY TECHNOLOGY SERVICES PRIVATE LIMITEDProfession (Job Category):Engineering &amp; ScienceJob Schedule: Full timeRemote:NoJob Description:Activities InvolvedAble to perform the following activities:<ul><li>Review of Tender document, technical specifications and preparation of Design Intent Document</li><li>Preparation of Protection SLD showing principles, relays and meters</li><li>Preparation of Functional Design Standards/Descriptions</li><li>Preparation of Signal list, trip matrix, Logics &amp; Interlocks</li><li>Review of Vendor drawings and documents (technical vetting of Control &amp; Relay panels, Auxiliary System)</li><li>Preparation of schematic diagrams for the interface’s equipment in Control &amp; Relay Panel scheme thus providing completeness</li><li>Preparation of relay ordering information.</li><li>Preparation of circuit diagrams – New &amp; Existing Set-up (applicable for retrofit projects)</li><li>Preparation of Cable block diagram</li><li>Preparation of Cable Schedule &amp; BoQ estimation for ordering</li><li>Preparation of Wiring/Termination diagrams</li><li>Preparation of Core sheets</li><li>Preparation of SCS IO Schedule</li><li>Panel Engineering Expertise (Layouts, circuit diagram, wiring table, terminal table etc.,) - Preferred</li><li>Preparation of Voltage drop calculation - Trip &amp; Close coil, LVAC power cable</li><li>Identification of existing drawings and modifying them using Red and Green markups as per standard requirements</li><li>Interface knowledge with Primary Equipment, Bay Controller Units /SCADA/RTU/Tele protection are essential</li><li>Auxiliary Power System design like Low Voltage AC Panel &amp; DC Panel requirements, Aux Tr and Battery &amp; Charger Sizing, ACDC Cable sizing &amp; CB selectivity study.</li><li>CT / VT Sizing</li><li>Relay configuration (Preferred)</li><li>Excellent knowledge in AIS &amp; GIS secondary designs.</li><li>As Built documentation</li><li>Co-ordination with other departments like primary, lead engineer, sourcing, C&amp;R factory counterpart &amp; own department control and protection etc. for design progress &amp; completion</li><li>Vendor Offer Evaluations.  FAT / SAT of primary secondary equipment, system as and when needed.</li><li>Ensure Ontime delivery of design deliverables &amp; to be vigilant on project schedule impacts.</li><li>Responsible for obtaining customer approvals for the designs and drawings</li><li>Technical risk and opportunity assessment and validation</li><li>Take part in customer meetings / site visits for tender/project clarifications</li><li>Support and act as interface engineer during erection &amp; commissioning</li><li>Estimation of engineering effort for each project for costing at tender stage</li><li>Innovative ideas to reduce Engineering effort</li><li>Plan, implement, review and continuously improvise quality system</li><li>Ensure the Safety through design principles which meant for complete project lifecycle.</li></ul>Having an idea about the following activities:<ul><li>Vendor Offer Evaluations.  FAT / SAT of primary secondary equipment, system as and when needed.</li><li>Ensure Ontime delivery of design deliverables &amp; to be vigilant on project schedule impacts.</li><li>Technical data sheets verification of equipment’s. Knowledge of equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc</li><li>Technical risk and opportunity assessment and validation</li><li>Take part in customer meetings / site visits for tender/project clarifications</li><li>Support and act as interface engineer during erection &amp; commissioning</li><li>Estimation of engineering effort for each project for costing at tender stage</li><li>Innovative ideas to reduce Engineering effort</li><li>Vendor Offer Evaluations.  FAT / SAT of primary secondary equipment, system as and when needed.</li><li>Ensure Ontime delivery of design deliverables &amp; to be vigilant on project schedule impacts.</li><li>Support and act as interface engineer during erection &amp; commissioning</li><li>Plan, implement, review and continuously improvise quality system &amp; follow OPEX initiatives</li></ul>Accessibility and reasonable accommodationQualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a <a href="https://www.hitachienergy.com/contact-us/general-inquiry?type=I+have+a+General+question">general inquiry form</a> on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response. Use of Al and automated tools in recruitmentAs part of our recruitment process, Hitachi Energy uses digital and automated tools, including Al-supported solutions, to assist with activities such as application screening, job matching, and interview scheduling. These tools are designed to support our recruiters and do not replace human decision-making. Candidate data is processed in accordance with applicable data protection and employment laws as well as <a href="https://www.hitachi.com/en-us/gdpr">Hitachi's Global Data Privacy Notice.</a> Background Screening and Security ChecksAs part of the hiring process, Hitachi Energy conducts pre-employment background checks that may include verification of employment history, education, criminal records, and other relevant information, in accordance with applicable laws.For certain roles—particularly those involving access to sensitive information, financial responsibilities, client data, regulated environments, or security-sensitive functions—additional or more comprehensive background or security screenings may be required. These may include, but are not limited to, enhanced criminal history checks, credit history reviews (where legally permissible), sanctions screening, or other due diligence measures aligned with the responsibilities of the position.The scope and depth of any background or security review will be determined based on the nature of the role and business necessity, and will always be conducted in compliance with applicable federal, state, and local laws. Candidates will be notified and, where required, asked to provide consent prior to the initiation of any such checks.

Hitachi Energy is a global technology leader that is advancing a sustainable energy future for all. We serve customers in the utility, industry and infrastructure sectors with innovative solutions and services across the value chain. Together with customers and partners, we pioneer technologies and enable the digital transformation required to accelerate the energy transition towards a carbon-neutral future. We are advancing the world&rsquo;s energy system to become more sustainable, flexible and secure whilst balancing social, environmental and economic value. Hitachi Energy has a proven track record and unparalleled installed base in more than 140 countries.

Secondary Engineer

Location:Chennai, Tamil Nadu, IndiaJob ID: R0135685Date Posted:2026-07-14Company Name:HITACHI ENERGY TECHNOLOGY SERVICES PRIVATE LIMITEDProfession (Job Category):Engineering &amp; ScienceJob Schedule: Full timeRemote:NoJob Description:Activities InvolvedAble to perform the following activities:<ul><li>Review of Tender document, technical specifications and preparation of Design Intent Document</li><li>Preparation of Protection SLD showing principles, relays and meters</li><li>Preparation of Functional Design Standards/Descriptions</li><li>Preparation of Signal list, trip matrix, Logics &amp; Interlocks</li><li>Review of Vendor drawings and documents (technical vetting of Control &amp; Relay panels, Auxiliary System)</li><li>Preparation of schematic diagrams for the interface’s equipment in Control &amp; Relay Panel scheme thus providing completeness</li><li>Preparation of relay ordering information.</li><li>Preparation of circuit diagrams – New &amp; Existing Set-up (applicable for retrofit projects)</li><li>Preparation of Cable block diagram</li><li>Preparation of Cable Schedule &amp; BoQ estimation for ordering</li><li>Preparation of Wiring/Termination diagrams</li><li>Preparation of Core sheets</li><li>Preparation of SCS IO Schedule</li><li>Panel Engineering Expertise (Layouts, circuit diagram, wiring table, terminal table etc.,) - Preferred</li><li>Preparation of Voltage drop calculation - Trip &amp; Close coil, LVAC power cable</li><li>Identification of existing drawings and modifying them using Red and Green markups as per standard requirements</li><li>Interface knowledge with Primary Equipment, Bay Controller Units /SCADA/RTU/Tele protection are essential</li><li>Auxiliary Power System design like Low Voltage AC Panel &amp; DC Panel requirements, Aux Tr and Battery &amp; Charger Sizing, ACDC Cable sizing &amp; CB selectivity study.</li><li>CT / VT Sizing</li><li>Relay configuration (Preferred)</li><li>Excellent knowledge in AIS &amp; GIS secondary designs.</li><li>As Built documentation</li><li>Co-ordination with other departments like primary, lead engineer, sourcing, C&amp;R factory counterpart &amp; own department control and protection etc. for design progress &amp; completion</li><li>Vendor Offer Evaluations.  FAT / SAT of primary secondary equipment, system as and when needed.</li><li>Ensure Ontime delivery of design deliverables &amp; to be vigilant on project schedule impacts.</li><li>Responsible for obtaining customer approvals for the designs and drawings</li><li>Technical risk and opportunity assessment and validation</li><li>Take part in customer meetings / site visits for tender/project clarifications</li><li>Support and act as interface engineer during erection &amp; commissioning</li><li>Estimation of engineering effort for each project for costing at tender stage</li><li>Innovative ideas to reduce Engineering effort</li><li>Plan, implement, review and continuously improvise quality system</li><li>Ensure the Safety through design principles which meant for complete project lifecycle.</li></ul>Having an idea about the following activities:<ul><li>Vendor Offer Evaluations.  FAT / SAT of primary secondary equipment, system as and when needed.</li><li>Ensure Ontime delivery of design deliverables &amp; to be vigilant on project schedule impacts.</li><li>Technical data sheets verification of equipment’s. Knowledge of equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc</li><li>Technical risk and opportunity assessment and validation</li><li>Take part in customer meetings / site visits for tender/project clarifications</li><li>Support and act as interface engineer during erection &amp; commissioning</li><li>Estimation of engineering effort for each project for costing at tender stage</li><li>Innovative ideas to reduce Engineering effort</li><li>Vendor Offer Evaluations.  FAT / SAT of primary secondary equipment, system as and when needed.</li><li>Ensure Ontime delivery of design deliverables &amp; to be vigilant on project schedule impacts.</li><li>Support and act as interface engineer during erection &amp; commissioning</li><li>Plan, implement, review and continuously improvise quality system &amp; follow OPEX initiatives</li></ul>Accessibility and reasonable accommodationQualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a <a href="https://www.hitachienergy.com/contact-us/general-inquiry?type=I+have+a+General+question">general inquiry form</a> on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response. Use of Al and automated tools in recruitmentAs part of our recruitment process, Hitachi Energy uses digital and automated tools, including Al-supported solutions, to assist with activities such as application screening, job matching, and interview scheduling. These tools are designed to support our recruiters and do not replace human decision-making. Candidate data is processed in accordance with applicable data protection and employment laws as well as <a href="https://www.hitachi.com/en-us/gdpr">Hitachi's Global Data Privacy Notice.</a> Background Screening and Security ChecksAs part of the hiring process, Hitachi Energy conducts pre-employment background checks that may include verification of employment history, education, criminal records, and other relevant information, in accordance with applicable laws.For certain roles—particularly those involving access to sensitive information, financial responsibilities, client data, regulated environments, or security-sensitive functions—additional or more comprehensive background or security screenings may be required. These may include, but are not limited to, enhanced criminal history checks, credit history reviews (where legally permissible), sanctions screening, or other due diligence measures aligned with the responsibilities of the position.The scope and depth of any background or security review will be determined based on the nature of the role and business necessity, and will always be conducted in compliance with applicable federal, state, and local laws. Candidates will be notified and, where required, asked to provide consent prior to the initiation of any such checks.

Secondary Engineer

About the Job

About the Company

HITACHI ENERGY

Similar Jobs

Senior Electrical Engineer

Senior Electrical Engineer

Principal Engineer - HV Primary

Principal Engineer - HV Primary

Primary Engineer

Primary Engineer

Primary Engineer

Primary Engineer

Electrical Engineer

Electrical Engineer

Test and Assembly Engineer

Test and Assembly Engineer

Electrical Engineer - HV Primary

Electrical Engineer - HV Primary